Boning Alternatives

Tuesday’s Tips & Tricks: Boning Alternatives

Boning is a notion that can be used for many purposes. Corsets and bustiers come to mind first, but strapless bodices are often made with supportive boning, as well. If you’re making a garment that calls for boning, I don’t recommend using the flimsy plastic stuff that’s available from your local fabric shop. It’s cheap, easy to find, and easy to use, but it doesn’t hold up under pressure. The best boning is made of steel: either spiral steel, which is flexible and intended for curved seams, or spring steel, which is meant only for straight seams.

The problem is, corset supplies are neither cheap nor easy to acquire, unless you happen to live in one of the few cities that can boast a corset supply shop, like Farthingales. Most of us have to order our supplies online and that can get expensive, but there are alternatives to consider.

Unfortunately, there isn’t anything you can use to replace a proper corset busk and you don’t want to cheap out when buying one. Less expensive busks are made of thinner metal and can bend, buckle, or even snap under stress. Always buy the best quality busk you can afford. But what about boning?

You’ve probably heard about the concept of using plastic cable ties (aka zip ties) as boning. The question is, do they really work? It depends. Personally, I haven’t found any cable ties that are suitable for use in a Victorian corset. The resulting corset would be too flimsy and wouldn’t do a proper job. They do work great for mockups, however. The smallest cable ties are perfect for doll corsets. And I have successfully used them for Victorian bodices, as well. I usually layer two cable ties per boning channel, just to make sure I get the necessary stiffness and support.

Cable Ties

A Variety of Cable Ties

While cable ties are unsuitable for corsets, the much larger duct ties work beautifully for 18th century stays and pocket hoops. Duct ties are used to secure heating and air-conditioning ducts, so they’re more substantial than normal cable ties. They tend to be 36” long, between 3/8″ and 1/2″ wide, and they’re much thicker than cable ties. Because of their width, duct ties are not suitable for Victorian corsets or bodices, but 18th century stays use wider boning, making duct ties ideal.

Duct ties are quite flexible, so if you use them for pocket hoops, consider placing two duct ties per channel, just to ensure the hoops don’t collapse under the weight of your skirts.

Variety of Boning

Steel Boning vs. Cable Ties & Duct Ties

Why use cable ties instead of steel boning? Aside from being cheap and easy to find, plastic ties have many of the same properties as the baleen our ancestors used. I call them “artificial whalebone” because the plastic is firm, yet flexible, and it softens with body heat, molding to your shape as you wear it, just like whalebone. It has the added bonus of not being illegal to buy.

Plastic cable ties can easily be cut with household scissors, making it convenient and safe to use. No wire cutters! The ends don’t need to be tipped or capped, either. Just trim them into a rounded shape and file any rough edges with a metal nail file.

You can find cable ties at your local hardware store. You’ll want 1/4″ cable ties for bodices and mockups of corsets or strapless dresses, and 3/8″ or 1/2″ duct ties for stays and pocket hoops. Look for ties that are thicker and therefore stiffer. The ties sold in the electrical aisle may be too thin, so check the heating and air-conditioning section. This is where you’ll find the industrial duct ties, too.

The next time you’re at the hardware store, why not pick up a package of cable ties and give them a try?

~~*~~

Do you use cable ties or duct ties for your boning? What limitations or benefits have you found? Do you have any suggestions to share?

About Lisha Vidler

I am a sewing instructor living near Memphis, Tennessee.
This entry was posted in Tuesday's Tips & Tricks and tagged , , , , , , . Bookmark the permalink.

26 Responses to Boning Alternatives

  1. Nancy N says:

    I’m giving duct ties a try for the first time this summer — I have to make 4 sets of Tudor era partially boned stays, in a hurry, that will be worn in the summer heat outdoors. (They will also get farthingales, but I’m using the $$ steel boning there and saving money on the stays). So far I’m loving how they look when laced up. I bought a pair of “aviation snips” to cut them, and found they needed LOTS of filing to smooth their ends. I would’ve considered the duct ties for the farthingales too, but 36″ was the longest I could find, and I’ didn’t want to splice them. Can you get longer than that?
    Thanks for your blog! Very informative!

    • Lisha Vidler says:

      I haven’t found duct ties longer than 36″, though I suppose it’s possible they exist. You might check a supply shop for air conditioners and heating ducts, see if they have anything larger. Have fun with your Tudor event!

      • Mary Peterson says:

        I haven’t tried this, but as a costumer for several decades I suspect that it might work. We recently bought a large continuous roll of plastic strapping or banding for crating/shipping. It came from a well known national (US) shipping / warehouse online supply house. It’s challenging to cut with scissors (thus making it secure for shipping) but it’s about 5/8″ wide, slightly thicker than a cable tie but without the two outer ridges of a duct tie, and it’s CONTINUOUS, so you can go around the hem of a large hoop, smaller panniers, and more without having to join things. The roll isn’t cheap, but I believe that it’s still cheaper than metal hoops. (And no, it’s not that thin nasty yellow or green pebbled plastic stuff that sometimes is used to bind crates.)

  2. Harmony Olsen says:

    Thank you! I was thinking about this but the smaller ones and i had to look it up to see what would work cause I forgot to buy the boning tonight ! The most important thing that goes into the corset! So thanks again! This helps!

  3. KATHRYN HUGHETT says:

    I recently needed something to support a pair of boots (not of leather) that kept slouching down. I knew boning was the answer but also that the boning you get at Joann’s would not be sufficient. I told my husband what I needed and he recommended the steel strip from windshield wiper blades. It’s stainless steel and just under a 1/4 inch. He uses it to make lock picks. It’s flexible yet durable. It was perfect for my need.

  4. Donna Arnold says:

    Thank you! I’m making a dress for my niece for a school play, and trying to save money where I can. Zip ties will do the trick for the boning!

    • Lisha Vidler says:

      If you’re using regular zip-ties, you might need to double them to provide enough support. That’s what I do when I use zip-ties for Victorian bodices. If you need more support than that, you can try duct-ties, which are heavier and thicker, but also wider. It just depends on what you need.

      Also, I recently wrote an article filled with tips on amateur theatrical costuming. If you’re interested, I can email you the PDF file, or you can wait until I upload it to the site, which should (hopefully) be soon.

  5. samantha says:

    I went to the dollar store and bought a 10 pack of marshmellow/hotdog campfire roaster sticks. they are 3/8in wide each about 24in long and 1/8th inch thick. I had my boyfriend cut them with his grinder and smooth out the ends then bent them to sit flush after I finished seeing it all together. Fits Amazing!! Take 2 I marked my 3 in longer and had him bend the bones and tack weld/grind smooth and LOVE the rounded ends on the bones and they are strong. getting ready to go for #3 corset out if my $1 store campfire sticks!!

  6. Tina says:

    Thanks for the idea of cable ties. My fabric store close to my house moved to the other side of the city, so I was trying to find an alternative. Trying this tonight.

  7. Devorah says:

    I have seen cable ties described as industrial zip ties, fyi

  8. Penny says:

    I do not make costumes. I just hate underwire bra’s. However, for large busted woman, they offer the best for support. I recently had a wire bust out. The bra was still “good” but lopsided. I took out the other side which made the bra mostly worthless. After quarantine I found that I couldn’t use the fitting rooms. I lamented my situation to my husband, asking if he had any thick plastic, like “weed whacker stuff”. What he had was thin. He brainstormed a bit and asked if plastic cable ties might work. They fit almost perfectly. This bra is usable again and even more comfortable than ever! Just wanted to throw my opinion and “experience” into this discussion. I thought my husband was so brilliant to think of this, I just had to see if anyone else had ever thought of it. I like it!

  9. Jacque says:

    I regularly use thin zip ties as.boning in the bodices of modern sun dresses where the material is thin cotton. I hand wash and line dry my sun dresses and the zips are light and are fine to get wet.

  10. Kyla says:

    Woww I really Want to learn how to make corset so I can support my Studies. Do you have any tips? And is it possible to tell me the size of cable ties in mm? Thank you very muchh

    • Lisha Vidler says:

      The numbers don’t convert precisely, but 1/4″ is 6.35 mm and 1/2″ is 12.7 mm. As for learning to make corsets, the most important tips are using the right materials (sturdy fabrics, proper boning, two-piece grommets) and getting the fit right. There are some books on corsetmaking, one is The Basics of Corset Building, by Linda Sparks. An excellent resource is the online historical costuming academy Foundations Revealed. It’s a subscription service, but the content is high quality, they have video tutorials and articles on all aspects of corsetmaking, and they have a private group on Facebook with expert mentors who offer help with everything.

  11. Me says:

    Can I use those wires that hold notebooks together for an 1840’s corset?

    • Lisha Vidler says:

      I shouldn’t think so. Those wires are extremely thin, so a corset made with them wouldn’t offer any support whatsoever, and it would be all too easy to bend the corset out of shape, or even break a wire. Your best bet is a combination of spiral steel and spring steel, or artificial whalebone (available from some retailers).

  12. Kit says:

    Hi,
    I’m looking to make a pair of regency transitional stays, would you know of any good alternatives to cord/piping?

    • Lisha Vidler says:

      Corded stays can be quite supportive and are accurate for the time period. Other options would be cable ties (not always supportive enough for corsets), artificial whalebone (the real stuff, not cable ties), or steel boning, but steel wasn’t used until the mid-Victorian era. If done right, however, cording will work very well for transitional stays.

  13. Jchen says:

    do you suggest any other boning types other than steel for 1860 crinolines? I cant afford it on pricey websites so is there an alteritive that you can find in a hardware store?

    • Lisha Vidler says:

      You really need steel hoops to support the weight of all that fabric (at least two petticoats and a full skirt). I can’t think of anything at a hardware store that would be suitable. I wish I could be of more help!

  14. Emma B. says:

    So I sadly don’t have ties of any sort for boning around the house (and I’m currently job hunting so I don’t have much money so go out and get some) however I do have a spool of bra wire. Will this work in place of these materials or no?

    • Lisha Vidler says:

      I’m not sure. It depends on its width and thickness. The bra wire that I’ve seen is too narrow and thin for Victorian corsetry, though it might work for 18th century fully boned stays. You can always sew a mockup and test the bra wire.

  15. Random person says:

    Is 1/4 inch zip ties good for dress boning? I enjoy sewing and this could help out so I know which ones to buy when I start a new project

  16. Jessica says:

    Hi I’m trying to make a short bell shaped hoop skirt and trying to figure out what to use as the hoop my local fabric store how’s things that I think would be OK for a thin bodice but I do not think we stand up in a skirt Or course that you want heavy lifting in. Cable ties or duct types sound the perfect sickness but I don’t think you can find them in the correct length for a full hoop any suggestions?

    • Lisha Vidler says:

      Hoops, unfortunately, require specialty hoop wire. I’ve used heavy duty duct ties for 18th century pocket hoops, but even with a double layer, they barely hold up under the weight of petticoats.

Leave a Reply to Lisha Vidler Cancel reply

Your email address will not be published. Required fields are marked *